top of page

Groupe d'étude de marché

Public·45 membres
Caleb Cox
Caleb Cox

How to Save Money and Print More with a Chipless Firmware for Samsung ML-2160


How to Reset the Toner Level of Your Samsung ML-2160 Printer with a Chipless Firmware




If you have a Samsung ML-2160 printer, you may have encountered the problem of running out of toner and having to replace the cartridge. However, did you know that you can save money and extend the life of your cartridge by using a printer toner reset firmware fix? In this article, we will show you how to download and install a chipless firmware for your Samsung ML-2160 printer, which will allow you to reset the toner level anytime you want. You will also learn some tips and tricks for using your printer with a chipless firmware.




printer toner reset Firmware fix samsung ml 2160.rar Full



Introduction




What is a printer toner reset firmware fix? A printer toner reset firmware fix is a software program that modifies the internal data of your printer, so that it can ignore the chip on your toner cartridge that counts how many pages you have printed. This way, you can refill your cartridge with new toner powder and continue printing without having to buy a new cartridge.


Why do Why do you need it for your Samsung ML-2160 printer? The Samsung ML-2160 printer is a monochrome laser printer that uses a toner cartridge with a chip that monitors the toner level and prevents you from printing when it reaches zero. However, the chip is not very accurate and may report that your cartridge is empty even when there is still some toner left. Moreover, the chip does not reset itself when you refill the cartridge, so you have to buy a new one every time. This can be very costly and wasteful, especially if you print a lot of documents.


What are the benefits of using a chipless firmware? A chipless firmware is a modified firmware that bypasses the chip on your toner cartridge and lets you print as much as you want. With a chipless firmware, you can:



  • Save money by refilling your toner cartridge instead of buying a new one.



  • Reduce waste by reusing your toner cartridge instead of throwing it away.



  • Print more pages with the same amount of toner by adjusting the toner density and quality settings.



  • Reset the toner level anytime you want with a simple software tool or a hardware button.



  • Avoid errors and warnings that may occur when using a chipped cartridge.



In short, using a chipless firmware for your Samsung ML-2160 printer will give you more control and flexibility over your printing needs.


How to Download and Install the Printer Toner Reset Firmware Fix for Samsung ML-2160




Now that you know what a printer toner reset firmware fix is and why you need it for your Samsung ML-2160 printer, let's see how to download and install it. The process is very easy and fast, and you only need a few things:



  • A computer with Windows operating system.



  • A USB cable to connect your printer to your computer.



  • The printer toner reset firmware fix file (printer toner reset Firmware fix samsung ml 2160.rar).



Here are the steps to follow:



  • Download the printer toner reset firmware fix file (printer toner reset Firmware fix samsung ml 2160.rar) from this link: https://www.4shared.com/rar/8q9Q7gQ3ba/printer_toner_reset_Firmware_f.html. This file contains the chipless firmware and the software tool to reset the toner level. You may need to create an account or log in to download the file.



  • Extract the file to a folder on your computer using WinRAR or any other software that can open .rar files. You should see two files: ML-2160_V3.00.01.18.hd and USBlist2.exe.



  • Run the USBlist2.exe file as administrator. This will open a window that shows all the USB devices connected to your computer. Make sure your printer is turned off and not connected to your computer yet.



  • Connect your printer to your computer using the USB cable. Do not turn on your printer yet.



  • Press and hold the power button on your printer for about 15 seconds until the LED light turns red. This will put your printer in download mode, which means it is ready to receive the chipless firmware.



  • In the USBlist2 window, select ML-2160 from the drop-down menu and click on Update Firmware. A new window will open that shows the progress of the firmware update. Do not disconnect or turn off your printer or computer during this process.



  • When the firmware update is complete, you will see a message that says "Firmware Update Success". Click on OK and close the USBlist2 window.



  • Turn off your printer and disconnect it from your computer. You have successfully installed the chipless firmware on your Samsung ML-2160 printer.



How to Reset the Toner Level of Your Samsung ML-2160 Printer with a Chipless Firmware




After installing the chipless firmware on your Samsung ML-2160 printer, you can reset the toner level anytime you want. This will allow you to print more pages with the same cartridge and avoid errors and warnings that may occur when using a chipped cartridge. There are two ways to reset the toner level: using a software tool or using a hardware button.


Using a Software Tool




To reset the toner level using a software tool, you need to use the same USBlist2.exe file that you used to update the firmware. Here are the steps to follow:



Connect your printer to


  • Connect your printer to your computer using the USB cable and turn it on.



  • Run the USBlist2.exe file as administrator. This will open a window that shows all the USB devices connected to your computer. Select ML-2160 from the drop-down menu and click on Reset Toner Level. A new window will open that shows the current toner level of your printer.



  • Select the toner cartridge that you want to reset (black or color) and click on Reset. The toner level will be reset to 100% and you will see a message that says "Toner Level Reset Success". Click on OK and close the USBlist2 window.



  • Turn off your printer and disconnect it from your computer. You have successfully reset the toner level of your Samsung ML-2160 printer using a software tool.



Using a Hardware Button




To reset the toner level using a hardware button, you need to use the WPS button on your printer. This is a small button located on the back of your printer, next to the power cord. Here are the steps to follow:



  • Turn off your printer and open the front cover.



  • Press and hold the WPS button for about 10 seconds until the LED light turns green. This will reset the toner level of your printer to 100%.



  • Release the WPS button and close the front cover.



  • Turn on your printer and check the toner level on your printer display or on your computer. You have successfully reset the toner level of your Samsung ML-2160 printer using a hardware button.



Tips and Tricks for Using Your Samsung ML-2160 Printer with a Chipless Firmware




Now that you know how to reset the toner level of your Samsung ML-2160 printer with a chipless firmware, here are some tips and tricks for using your printer with a chipless firmware:


How to Save Money and Reduce Waste by Refilling Your Toner Cartridge




One of the main benefits of using a chipless firmware for your Samsung ML-2160 printer is that you can refill your toner cartridge instead of buying a new one. This will save you money and reduce waste, as well as improve the print quality and performance of your printer. To refill your toner cartridge, you need to buy a compatible toner powder kit, which usually comes with a funnel, a screwdriver, and instructions. Here are the steps to follow:



  • Remove the toner cartridge from your printer and place it on a flat surface.



  • Use the screwdriver to remove the screws that hold the side cover of the cartridge.



  • Lift off the side cover and locate the fill hole on the side of the cartridge.



  • Use the funnel to pour the toner powder into the fill hole until it is full. Do not overfill or spill the powder, as it may cause damage or leakage.



  • Replace the side cover and secure it with the screws.



  • Shake the cartridge gently to distribute the toner evenly inside.



  • Reinstall the cartridge into your printer and reset the toner level using one of the methods described above.



You can refill your toner cartridge several times before it wears out or needs replacement. However, you should also replace You should also replace the drum unit of your printer every 10,000 pages or when the print quality deteriorates. The drum unit is the part of the printer that transfers the toner image onto the paper. You can buy a compatible drum unit online or from a local store. To replace the drum unit, you need to follow these steps:



  • Turn off your printer and open the front cover.



  • Remove the toner cartridge from the printer and place it on a flat surface.



  • Remove the old drum unit from the printer by pulling it out gently.



  • Unpack the new drum unit and remove any protective materials.



  • Insert the new drum unit into the printer and align it with the slots.



  • Reinstall the toner cartridge into the printer and close the front cover.



  • Turn on your printer and print a test page to check the print quality.



By refilling your toner cartridge and replacing your drum unit, you can extend the life of your Samsung ML-2160 printer and save money and resources.


How to Avoid Common Problems and Errors When Using Your Printer with a Chipless Firmware




Using a chipless firmware for your Samsung ML-2160 printer can help you avoid some common problems and errors that may occur when using a chipped cartridge. However, there are still some things that you should be aware of and do to prevent any issues. Here are some tips:



  • Make sure you download and install the correct chipless firmware for your printer model and version. Do not use a firmware that is meant for another printer or an older version of your printer, as it may cause damage or malfunction.



  • Do not turn off or disconnect your printer or computer during the firmware update process, as it may interrupt or corrupt the firmware. If this happens, you may need to reinstall the firmware or contact us for assistance.



  • Do not use low-quality or incompatible toner powder or drum unit for your printer, as it may affect the print quality and performance. Use only high-quality and compatible products that are designed for your printer model.



  • Do not expose your toner cartridge or drum unit to direct sunlight, high temperature, or humidity, as it may damage or degrade them. Store them in a cool, dry, and dark place when not in use.



  • Do not shake or tilt your toner cartridge or drum unit excessively, as it may cause leakage or spillage. Handle them carefully and gently when installing or removing them from your printer.



  • Do not print more pages than the recommended maximum capacity of your toner cartridge or drum unit, as it may cause overheat or wear out. Check the specifications of your products and replace them when necessary.



By following these tips, you can avoid common problems and errors when using your Samsung ML-2160 printer with a chipless firmware.


How to Update Your Printer Driver and Software to Ensure Compatibility and Performance




To ensure compatibility and performance of your Samsung ML-2160 printer with a chipless firmware, you should also update your printer driver and software regularly. A printer driver is a software program that communicates with your printer and allows it to work with your computer and other devices. A printer software is a software program that provides additional features and functions for your printer, such as scanning, copying, faxing, etc. Updating your printer driver and software can help you:



  • Fix bugs and errors that may occur with your printer.



  • Improve the print quality and speed of your printer.



  • Add new features and functions to your printer.



  • Enhance the security and stability of your printer.



To update your printer driver and software, you need to visit the official website of Samsung and download the latest version of your printer driver and software. Here are the steps to follow:



  • Go to https://www.samsung.com/us/support/owners/product/mono-laser-printer-ml-2160-series. This is the official support page for Samsung ML-2160 series printers.



  • Select Downloads from the menu on the left side of the page. You will see a list of available downloads for your printer model.



  • Select Driver from the list and click on Download. This will download the latest version of your printer driver for Windows operating system. If you have a different operating system, select it from the drop-down menu and download the corresponding driver.



  • Select Software from the list and click on Download. This will download the latest version of your printer software for Windows operating system. If you have a different operating system, select it from the drop-down menu and download the corresponding software.



  • Save the downloaded files to a folder on your computer and run them as administrator. Follow the instructions on the screen to install the printer driver and software on your computer.



  • Restart your computer and printer to apply the changes. You have successfully updated your printer driver and software.



To check if your printer driver and software are up to date, you can also use the Samsung Easy Printer Manager, which is a software program that allows you to manage and monitor your printer settings and status. To use the Samsung Easy Printer Manager, you need to follow these steps:



  • Open the Samsung Easy Printer Manager on your computer. You can find it in the Start menu or on your desktop.



  • Select your printer from the list of devices on the left side of the window.



  • Select Support from the menu on the top of the window. You will see a list of support options for your printer.



  • Select Update Software from the list and click on Check for Updates. This will scan your computer and printer for any available updates.



  • If there are any updates, you will see a message that says "New version available". Click on Download and Install to download and install the updates.



  • If there are no updates, you will see a message that says "Your software is up to date". Click on OK to close the window.



By updating your printer driver and software regularly, you can ensure compatibility and performance of your Samsung ML-2160 printer with a chipless firmware.


Conclusion




In this article, we have shown you how to reset the toner level of your Samsung ML-2160 printer with a chipless firmware. We have also given you some tips and tricks for using your printer with a chipless firmware. By using a printer toner reset firmware fix for Samsung ML-2160, you can:



  • Save money by refilling your toner cartridge instead of buying a new one.



  • Reduce waste by reusing your toner cartridge instead of throwing it away.



  • Print more pages with the same amount of toner by adjusting the toner density and quality settings.



  • Reset the toner level anytime you want with a simple software tool or a hardware button.



  • Avoid errors and warnings that may occur when using a chipped cartridge.



Using a chipless firmware for your Samsung ML-2160 printer is easy and fast, and it will give you more control and flexibility over your printing needs. If you want to try it out, you can download the printer toner reset firmware fix file (printer toner reset Firmware fix samsung ml 2160.rar) from this link: https://www.4shared.com/rar/8q9Q7gQ3ba/printer_toner_reset_Firmware_f.html. If you need any assistance or support, you can contact us anytime and we will be happy to help you.


We hope you enjoyed this article and found it useful. If you did, please share it with your friends and colleagues who may also benefit from it. Thank you for reading!


FAQs




What is the difference between a chipless firmware and a fix firmware?




A chipless firmware is a modified firmware that bypasses the chip on your toner cartridge and lets you print as much as you want. A fix firmware is a modified firmware that resets the chip on your toner cartridge and lets you print until it reaches zero again. Both types of firmware can help you save money and reduce waste, but a chipless firmware is more convenient and flexible, as you do not need to reset the chip every time you refill your cartridge.


Is it safe to use a printer toner reset firmware fix for Samsung ML-2160?




Yes, it is safe to use a printer toner reset firmware fix for Samsung ML-2160, as long as you download and install it correctly. The chipless firmware does not affect or damage any other parts or functions of your printer, except for disabling the chip on your toner cartridge. The chipless firmware is also compatible with most operating systems and devices that support your printer model. However, if you encounter any problems or errors with your printer after using a chipless firmware, you can always revert back to the original firmware or contact us for assistance.


Will using a printer toner reset firmware fix void Will using a printer toner reset firmware fix void my warranty or damage my printer?




No, using a printer toner reset firmware fix for Samsung ML-2160 will not void your warranty or damage your printer, as long as you use it properly and responsibly. The chipless firmware does not alter or interfere with any other parts or functions of your printer, except for disabling the chip on your toner cartridge. The chipless firmware is also reversible, which means you can restore the original firmware anytime you want. However, if you use a low-quality or incompatible toner powder or drum unit for your printer, or if you print more pages than the recommended maximum capacity of your cartridge or drum unit, you may cause overheat or wear out of your printer, which may void your warranty or damage your printer. Therefore, you should always use high-quality and compatible products that are designed for your printer model, and follow the specifications and instructions of your products and printer.


How often do I need to reset the toner level of my Samsung ML-2160 printer?




You can reset the toner level of your Samsung ML-2160 printer anytime you want, depending on your printing needs and preferences. However, we recommend that you reset the toner level when it reaches about 10% or lower, as this will ensure that you have enough toner to print without interruption or degradation of quality. You can check the toner level of your printer on your printer display or on your computer using the Samsung Easy Printer Manager. You can also set up an alert or notification to remind you when the toner level is low. To reset the toner level, you can use either a software tool or a hardware button, as described above.


Where can I get more support or assistance for using a printer toner reset firmware fix for Samsung ML-2160?




If you have any questions, concerns, or feedback about using a printer toner reset firmware fix for Samsung ML-2160, you can contact us anytime and we will be happy to help you. You can reach us by email, phone, chat, or social media. You can also visit our website for more information and resources about our products and services. We are always ready to provide you with the best support and assistan


À propos

Bienvenue sur le groupe ! Vous pouvez entrer en contact avec...

membres

bottom of page