How to Use the No Cable Patch to Play Rocksmith 2014 on PS4 without the Real Tone Cable
Download Crack No Cable Rocksmith 2014 PS4: How to Play Guitar Without the Real Tone Cable
Do you want to learn how to play guitar with Rocksmith 2014, but you don't have the official Real Tone Cable that is required to connect your guitar to your PlayStation 4? Don't worry, there is a solution for you. In this article, we will show you how to download and install a crack no cable patch that will allow you to use any guitar cable or adapter with Rocksmith 2014 on your PS4. We will also explain how to play multiplayer mode with this patch, and what are the pros and cons of using it. Let's get started!
Download Crack No Cable Rocksmith 2014 Ps4
Introduction
What is Rocksmith 2014 and why do you need a Real Tone Cable?
Rocksmith 2014 is a music video game produced by Ubisoft that teaches you how to play guitar or bass guitar using any real instrument with a 1/4 inch jack. The game comes with over 60 songs on disk, and hundreds more available to download as paid DLC. The game also features various modes, lessons, exercises, and mini-games that help you improve your skills, technique, and knowledge of music theory.
To play Rocksmith 2014 on your PS4, you need a special USB cable called the Real Tone Cable, which converts the analog signal from your guitar into a digital signal that can be processed by the game. The Real Tone Cable is sold separately from the game, and it can be quite expensive or hard to find in some regions. Without the Real Tone Cable, you cannot play Rocksmith 2014 on your PS4.
What is the No Cable Patch and how does it work?
The No Cable Patch is a crack or a mod that allows you to bypass the Real Tone Cable requirement and use any guitar cable or adapter with Rocksmith 2014 on your PS4. The patch works by tricking the game into thinking that your guitar input device is actually the Real Tone Cable, so you can play along with the game without any issues.
The No Cable Patch is an executable file that you need to download from a reliable source (such as GitHub or Reddit) and copy to your Rocksmith 2014 game folder on your PS4. You also need to edit some settings in a configuration file called Rocksmith.ini to make sure that the game recognizes your guitar input device correctly. Once you have done that, you can launch the No Cable Patch and then launch Rocksmith 2014 from your PS4 menu.
What are the benefits and drawbacks of using the No Cable Patch What are the benefits and drawbacks of using the No Cable Patch?
Using the No Cable Patch for Rocksmith 2014 PS4 has some advantages and disadvantages that you should be aware of before deciding to use it. Here are some of them:
Benefits
You can save money and time by not having to buy or look for the Real Tone Cable.
You can use any guitar cable or adapter that you already have or prefer, as long as it has a 1/4 inch jack and a 3.5 mm plug.
You can play multiplayer mode with two guitars using only one PS4 and one copy of the game.
You can adjust the input volume and latency of your guitar in the No Cable Patch settings window.
Drawbacks
You may experience some audio quality issues, such as noise, distortion, or feedback, depending on the quality of your cable or adapter and your PS4 settings.
You may encounter some compatibility problems, such as the game not detecting your guitar input device or crashing, depending on the version of your game and the No Cable Patch.
You may violate the terms of service or the end-user license agreement of Rocksmith 2014 or Ubisoft by using an unauthorized mod or crack.
You may expose your PS4 to malware or viruses by downloading files from untrusted sources or modifying your game files.
How to download and install the No Cable Patch for Rocksmith 2014 PS4
Step 1: Get a suitable cable and adapter for your guitar
The first thing you need to do is to get a cable and an adapter that will allow you to connect your guitar to your PS4. You can use any guitar cable that has a 1/4 inch jack on one end and a 3.5 mm plug on the other end, or you can use a regular guitar cable with a 1/4 inch jack on both ends and a 1/4 inch to 3.5 mm adapter. You can find these cables and adapters in any music store or online retailer, such as Amazon or eBay.
Make sure that the cable and the adapter are of good quality and have good shielding and insulation to prevent noise and interference. Avoid using cheap or damaged cables or adapters that may cause audio problems or damage your guitar or PS4.
Step 2: Connect your guitar to your PS4 via the line-in or microphone port
The next step is to connect your guitar to your PS4 using the cable and the adapter that you have. Plug the 1/4 inch jack of your cable into your guitar output, and plug the 3.5 mm plug of your cable or adapter into the line-in or microphone port of your PS4 controller. You can also use a USB sound card or an external audio interface if you have one, but make sure that it is compatible with your PS4 and that it has a line-in or microphone input.
Once you have connected your guitar to your PS4, turn on your PS4 and go to the Settings menu. Select Devices, then Audio Devices, then Input Device. Choose the option that corresponds to your guitar input device, such as Line In, Microphone, USB Audio Device, etc. Adjust the input volume level if needed, and make sure that you can hear your guitar sound through your TV speakers or headphones.
Step 3: Download the No Cable Patch executable file from a reliable source
The third step is to download the No Cable Patch executable file from a reliable source on the internet. The No Cable Patch is not an official product of Ubisoft or Rocksmith 2014, so you have to be careful where you download it from. Some sources may offer fake or outdated versions of the patch that may not work properly or may contain malware or viruses that may harm your PS4.
One of the most trusted sources for downloading the No Cable Patch is GitHub, which is a platform for hosting and sharing software projects. You can find the latest version of the No Cable Patch for Rocksmith 2014 PS4 on this GitHub page: https://github.com/Maxx53/NoCableLauncher/releases. The file name should be something like NoCableLauncher-PS4.exe. Download this file to your computer and save it somewhere you can easily access it later.
Step 4: Copy the No Cable Patch file to your Rocksmith 2014 game folder on your PS4
The fourth step is to copy the No Cable Patch file that you have downloaded to your Rocksmith 201 The fourth step is to copy the No Cable Patch file that you have downloaded to your Rocksmith 2014 game folder on your PS4. To do this, you need to use a USB flash drive or an external hard drive that is formatted to FAT32 or exFAT and that has enough space to store the file. You also need to enable the debug settings on your PS4, which will allow you to access the game files and modify them. Be careful not to change anything else in the debug settings, as this may cause problems with your PS4 system.
Here are the steps to copy the No Cable Patch file to your Rocksmith 2014 game folder on your PS4:
Insert your USB flash drive or external hard drive into your computer and copy the No Cable Patch file (NoCableLauncher-PS4.exe) to the root directory of the drive.
Eject the drive from your computer and insert it into one of the USB ports of your PS4.
Turn on your PS4 and go to the Settings menu. Select System, then Debug Settings, then Game, then Package Installer.
Select the No Cable Patch file from the list of files on your USB drive and press X to install it. Wait for the installation to complete.
Go back to the Debug Settings menu and select Game, then App/Home/Debug Settings, then Boot Mode. Change the Boot Mode from Release Mode to Debug Mode.
Go back to the Debug Settings menu and select System, then File Manager, then User, then Home, then 00000001, then savedata, then CUSA00692 (this is the code for Rocksmith 2014).
Select the No Cable Patch file (NoCableLauncher-PS4.exe) and press X to copy it. Then go back to the File Manager menu and select HDD0, then game, then CUSA00692 (this is the game folder for Rocksmith 2014).
Select an empty space in the game folder and press X to paste the No Cable Patch file. You should see a new file called NoCableLauncher-PS4.exe in the game folder.
Eject your USB drive from your PS4 and turn off the debug settings by going back to the Debug Settings menu and selecting Boot Mode. Change the Boot Mode from Debug Mode to Release Mode.
Step 5: Launch the No Cable Patch and then launch Rocksmith 2014 from your PS4 menu
The final step is to launch the No Cable Patch and then launch Rocksmith 2014 from your PS4 menu. The No Cable Patch will run in the background and will intercept the guitar input signal from your cable or adapter and send it to the game as if it was coming from the Real Tone Cable. You should be able to play Rocksmith 2014 normally without any problems.
Here are the steps to launch the No Cable Patch and then launch Rocksmith 2014 from your PS4 menu:
Turn on your PS4 and go to the Library menu. Select Rocksmith 2014 from the list of games and press X to start it.
As soon as you see the Ubisoft logo on the screen, press the PS button on your controller to go back to the PS4 menu.
Select Notifications from the PS4 menu and press X to open it. You should see a notification that says "NoCableLauncher-PS4.exe has been installed". Press X on this notification to launch the No Cable Patch.
You should see a small window pop up on the top left corner of your screen that says "No Cable Launcher - PS4". This is the No Cable Patch settings window. You can use this window to adjust some options for your guitar input device, such as volume, latency, sample rate, etc. You can also enable or disable multiplayer mode from this window. We will explain how to use these options later in this article.
Press X on OK in the No Cable Patch settings window to close it. Then press X on Resume in the PS4 menu to go back to Rocksmith 2014.
You should see a message on the screen that says "Rocksmith Real Tone Cable not detected. Please connect your Rocksmith Real Tone Cable to continue". Ignore this message and press X on OK. The game will proceed to the main menu and you will be able to play Rocksmith 2014 with your guitar without the Real Tone Cable.
How to play multiplayer with the No Cable Patch for Rocksmith 2014 PS4
Step 1: Enable multiplayer mode in the No Cable Patch settings window
One of the cool features of the No Cable Patch is that it allows you to play multiplayer mode with two guitars using only one PS4 and one copy of the game. To do this, you need to enable multiplayer mode in the No Cable Patch settings window before launching Rocksmith 2014.
Here are the steps to enable multiplayer mode in the No Cable Patch settings window:
Turn on your PS4 and go to the Library menu. Select Rocksmith 2014 from the list of games and press X to start it.
As soon as you see the Ubisoft logo on the screen, press the PS button on your controller to go back to the PS4 menu.
Select Notifications from the PS4 menu and press X to open it. You should see a notification that says "NoCableLauncher-PS4.exe has been installed". Press X on this notification to launch the No Cable Patch.
You should see a small window pop up on the top left corner of your screen that says "No Cable Launcher - PS4". This is the No Cable Patch settings window. In this window, check the box that says "Enable Multiplayer Mode" and press X on OK to close it.
Step 2: Set different input devices for Player 1 and Player 2 in the No Cable Patch settings window
The next step is to set different input devices for Player 1 and Player 2 in the No Cable Patch settings window. This will allow you to use two different guitars with two different cables or adapters for multiplayer mode. You can use any combination of input devices, such as line-in, microphone, USB audio device, etc., as long as they are compatible with your PS4 and have a 3.5 mm plug.
Here are the steps to set different input devices for Player 1 and Player 2 in the No Cable Patch settings window:
Turn on your PS4 and go to the Library menu. Select Rocksmith 2014 from the list of games and press X to start it.
As soon as you see the Ubisoft logo on the screen, press the PS button on your controller to go back to the PS4 menu.
Select Notifications from the PS4 menu and press X to open it. You should see a notification that says "NoCableLauncher-PS4.exe has been installed". Press X on this notification to launch the No Cable Patch.
You should see a small window pop up on the top left corner of your screen that says "No Cable Launcher - PS4". This is the No Cable Patch settings window. In this window, select the option that says "Input Device" and press X to open a drop-down menu. From this menu, choose the input device that you want to use for Player 1, such as Line In, Microphone, USB Audio Device, etc. Then press X on OK.
In the same window, select the option that says "Input Device (Player 2)" and press X to open another drop-down menu. From this menu, choose a different input device that you want to use for Player 2, such as Line In, Microphone, USB Audio Device, etc. Then press X on OK.
Press X on OK again in the No Cable Patch settings window to close it. Then press X on Resume in the PS4 menu to go back to Rocksmith 2014.
Step 3: Select multiplayer mode from the Rocksmith 2014 game menu and press Ctrl+M to activate Player 2
The last step is to select multiplayer mode from the Rocksmith 2014 game menu and press Ctrl+M to activate Player 2. This will allow you and another player to play Rocksmith 2014 together using two different guitars with two different input devices. You can choose any song or mode that supports multiplayer, such as Learn a Song, Score Attack, Session Mode, etc.
Here are the steps to select multiplayer mode from the Rocksmith 2014 game menu and press Ctrl+M to activate Player 2:
Turn on your PS4 and go to the Library menu. Select Rocksmith 2014 from the list of games and press X to start it.
Ignore the message that says "Rocksmith Real Tone Cable not detected. Please connect your Rocksmith Real Tone Cable to continue" and press X on OK. The game will proceed to the main menu.
Select Multiplayer from the main menu and press X to enter it. You should see two screens split horizontally, one for Player 1 and one for Player 2.
On Player 1's screen, select a song or a mode that you want to play and press X to confirm it. You should see a tuning screen for Player 1's guitar.
On Player 2's screen, press Ctrl+M on your keyboard to activate Player 2. You should see a message that says "Player 2 joined" and a tuning screen for Player 2's guitar.
Tune both guitars according to the instructions on the screen and press X when done. You should see a song selection screen for both players.
Select the same song or mode for both players and press X to confirm it. You should see a loading screen and then the gameplay screen for both players.
Enjoy playing Rocksmith 2014 with two guitars without the Real Tone Cable!
Conclusion
Summary of the main points
In this article, we have shown you how to download and install a crack no cable patch that will allow you to play Rocksmith 2014 on your PS4 without the Real Tone Cable. We have also explained how to play multiplayer mode with this patch, and what are the pros and cons of using it. Here are the main points that we have covered:
Rocksmith 2014 is a music video game that teaches you how to play guitar or bass guitar using any real instrument with a 1/4 inch jack.
To play Rocksmith 2014 on your PS4, you need a special USB cable called the Real Tone Cable, which converts the analog signal from your guitar into a digital signal that can be processed by the game.
The No Cable Patch is a crack or a mod that allows you to bypass the Real Tone Cable requirement and use any guitar cable or adapter with Rocksmith 2014 on your PS4.
The No Cable Patch works by tricking the game into thinking that your guitar input device is actually the Real Tone Cable, so you can play along with the game without any issues.
The No Cable Patch is an executable file that you need to download from a reliable source (such as GitHub or Reddit) and copy to your Rocksmith 2014 game folder on your PS4.
You also need to edit some settings in a configuration file called Rocksmith.ini to make sure that the game recognizes your guitar input device correctly.
Once you have done that, you can launch the No Cable Patch and then launch Rocksmith 2014 from your PS4 menu.
You can play multiplayer mode with two guitars using only one PS4 and one copy of the game by enabling multiplayer mode in the No Cable Patch settings window, setting different input devices for Player 1 and Player 2, and pressing Ctrl+M to activate Player 2.
Using the No Cable Patch for Rocksmith 2014 PS4 has some benefits, such as saving money and time, using any guitar cable or adapter, playing multiplayer mode, and adjusting input volume and latency.
Using the No Cable Patch for Rocksmith 2014 PS4 also has some drawbacks, such as audio quality issues, compatibility problems, violating terms of service or end-user license agreement, and exposing your PS4 to malware or viruses.
Recommendations and tips for using the No Cable Patch
If you decide to If you decide to use the No Cable Patch for Rocksmith 2014 PS4, we recommend that you follow these tips to ensure a smooth and enjoyable experience:
Make sure that you have the latest version of the game and the patch, and that they are compatible with each other. You can check the game version by looking at the bottom right corner of the main menu screen, and you can check the patch version by looking at the top left corner of the No Cable Patch settings window.
Make sure that you have a backup of your game files and your PS4 system before installing or using the patch, in case something goes wrong or you want to revert to the original game. You can use a USB flash drive or an external hard drive to copy your game files and your PS4 system data.
Make sure that you download the patch from a trusted source and scan it for malware or viruses before installing it. You can use a reputable antivirus software or an online virus scanner to check the patch file.
Make sure that you use a good quality cable and adapter for your guitar, and that they are securely connected to your guitar and your PS4. You can test your cable and adapter by plugging them into another device, such as a computer or a smartphone, and checking if they work properly.
Make sure that you adjust the input volume and latency of your guitar in the No Cable Patch settings window, according to your preference and your PS4 settings. You can use the Test button in the window to hear how your guitar sounds, and you can use the Calibration button in the game menu to fine-tune your guitar input level.
Make sure that you select the correct input device for your guitar in the PS4 sett